Maintain a Craftsman opener by checking its safety reversal and photo-eyes, keeping the door hardware serviced and following the lubrication schedule for its model. Craftsman models differ in drive type and battery backup. A door that strains, binds or reverses needs diagnosis before travel or force settings are changed.
Common problems and what they usually mean
- Door doesn't open or close fully: check for a mechanical obstruction or binding; travel settings are only one possible cause. Do not increase force to overcome it.
- Door reverses right after touching the floor: close travel may be set too far. Sensor faults usually stop closing before floor contact; have persistent reversal checked.
- Remote doesn't work: check the battery first, then the distance to the opener and the antenna on the motor unit.
Maintaining a Craftsman opener
- Clean the motor unit periodically to keep dust and debris out.
- Follow the model manual for rail, screw or chain lubrication. Do not spray the drive belt or door tracks.
- Inspect the safety sensors and door controls for damage or misalignment.
Installing a Craftsman opener
Craftsman openers are designed for DIY installation, with basic electrical knowledge helpful. Before you hang a new opener, have a technician check the springs and door balance. A door that is out of balance wears out a new opener quickly, and you should never adjust the springs yourself.
Frequently asked questions
How do I program the remote?
Follow the steps in your model's manual. For many compatible Craftsman remotes, briefly press and release Learn, then hold the remote button during the programming window. Holding Learn can erase saved devices; use the exact remote and opener instructions.
Are Craftsman openers compatible with all garage doors?
Most are, but the right choice depends on your door's weight and size. Ask us if you are not sure a specific model will suit your door.
How do I maintain my Craftsman opener?
Wipe the exterior housing, follow the manual's lubrication instructions and inspect the sensors and controls. Do not open powered electrical covers. A few times a year is reasonable for most households.
Do you service Craftsman openers?
Yes. Craftsman is one of the brands we install and repair, along with LiftMaster, Chamberlain, Genie and Linear.
If your Craftsman opener needs attention, call (916) 838-8182 and describe what it is doing, or see opener repair and installation.
Share:
